|
 |
|
|
A)
B)
C)
____________________________________________________________
|
Single Forks:
A) OUT OF STOCK 12mm razor
B) 25mm brush
C) 31mm brush
Note: out of stock only applies to nickel items and not the golded brass
items.
|
Note: Custom forks are only available with the purchase of a
stand. Note: We reserve the right to combine forks to make configurations
based on stock on hand.
Ordering information:
Currently, you will need to select the base size
and number of forks to place a custom stand order. Then, in the "special
instruction" box at check out you can put in what fork/s or configuration
you are interested in.
For example (abbreviation):
Four forks: 12mm razor, 12mm razor, 25mm
brush, 31mm brush. (12,12,25,31) Three
forks: Triple fork model #2 - see photos below. (12, 12, 31)
Two forks: 12mm razor, 12mm razor. (12, 12)
Single fork: 31mm brush. (31) |
|
A) upper B) lower |
Double Forks:
A) 12mm razor/12mm razor
B) 31mm brush/25mm brush
C) 12mm razor/25mm brush |
Regular Base,
#em-std
|
|
C) |
 |
OUT OF STOCK - Large Base,
em-stdl
See below
for triple forks and additional fork combinations and ideas...
|
|
______________________________________________________________ |
 |
Example of single and double fork configurations from the fork designs shown
above. Configuration shown:
Double fork; 12mm, 25mm and Single fork; 12mm and Single fork; 25mm NOTE:
that this configuration would be made with the 25/12 combo fork and not
single forks due to inventory constraints. |
|
|
 |
Three fork model #1:
12mm razor, 25mm brush, 31mm brush |
|
|
|
|
|
|
|
 |
Three fork model #2:
12mm razor, 12mm razor, 31mm brush |
|
|
|
|
|
|
|
 |
Three fork model #3:
12mm razor, 12mm razor, 25mm brush |
|
|
|
___________________________________________________________________________________ |
|
 |
Over view example: Left: Large base
with 12mm razor, 25mm brush double fork, and a 31mm single brush fork and a
12mm single razor fork.
Right: Regular base with 12mm razor, 25mm brush and 31mm brush
triple fork.
|
|
|
|
|
|
|
|
 |
Bases: Regular
Large
|
|
|
|
|
|
|
|
Set-up examples:
Notes - the 12mm razor fork will hold the
Merkur Futur or Vision razor with the head facing down as shown in the first
photo. Some brushes can be held at the lower part/base of the handle, while
other brushes will need to be inserted at the point where the bristles meet the
handle depending upon the diameter of your brush and the fork size used.
|
|
 |
12mm razor, 25mm brush, 31mm brush triple fork. |
|
|
|
 |
12m razor, 12mm razor, 25mm brush, 31mm brush. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
12m razor, 12mm razor, 25mm brush, 31mm brush. |
|
|
|
|
|
|
|
|
 |
12m razor, 12mm razor, 25mm brush, 31mm brush. |
|
|
|
|
|
|
|
|
 |
12m razor, 12mm razor, 25mm brush, 31mm brush. |
|
|
|
___________________________________________________________________
|
 |
Example of the flat metal forks... in two center hole
sizes. This does not apply
to customs stands on this page.
One of these fork models is what is generally used for
the stands found elsewhere on this site and subject to what is on hand at
the time. They only come in a 12mm razor and 25mm brush fork combination. |
|
|
----------------------------------------- |
|
c
Not sure which bristle?
read about it.
d
|