|
|
This section provides
additional razor information and demonstrates the basic blade loading
techniques for the Merkur brand double edged
razors available from Em's Place.
About
Shaving with a Double Edge Razor
If you are new to shaving with a double edge razor you need to understand
that nicks can occur, especially in the early stages of getting use to using
this tool. In general, give yourself time to get comfortable with the
razor’s operation and new shaving techniques. Be sure to soften the whiskers
with hot water or hot towel before lathering up. Creating lather with a
quality shaving soap or cream formulated for use with a shaving brush will
greatly enhance the experience.
To use: Take a slow, light pass at the shave area. For larger parts the
strokes may be longer and for chin and other hard to reach areas take more,
and shorter, passes. To start you may want to shave just the cheeks and easy
areas while you get use to the razor, and take only one pass with the grain.
Since whiskers can grow in different directions on your face and neck, check
out the pattern of growth before using the double edge unless you already
know what direction your hair grows. The major
things to keep in mind are go slowly and apply NO… pressure. Use a feather
light touch and let the razor glide. Another consideration is blade angle.
Since other blades pre-adjust the angle, it may be necessary for you to use
your arm or hand to manually adjust the angle when using a double edge. With
practice you can experience some of the most smooth, close and comfortable
shaves possible. Keep sharp instruments and blades out of the reach of
children and pets. Use with caution and don’t hold the razor with a soapy or
oily hand as that can cause the razor to slip. Also note the sample blade
included with some razors, or an occasional bad blade, can give a less than
satisfactory shave. In this event, try a new, fresh blade.
More details for new wet shavers or
those thinking about wet shaving with a brush...
-----------------------------------------
~ More info: Merkur
adjustable razors
video
showing size comparison for the Progress, Futur and Vision
~
------------------------------------------------------------------------- |
The
Vision opens using the butterfly (silo) action by twisting the lower
section of the handle. This top-of-the-line model is the most heavy duty and
complex double edge available. Its high precision performance and fully
adjustable blade angle allows the user to customize the shave to personal
preference. 4 3/4 inch total razor length. Weight is 4.4 ounce. The band with
the word
VISION is used to adjust the blade gap - Turning clockwise
is most closed, and turning counter-clockwise is most open.
Click
for more information or
video |
 |
|
------------------------------------------------------------------------- |
|
The Futur opens by pushing the top cap
off as shown starting with a side upward movement. This traditional and
fully adjustable razor is second only to the Vision in weight and
performance. A great way to find the closest and most comfortable shave.
4 3/8 inch total razor length. Weight is 4.2 ounce. The numbers 1 through 6
are used to adjust the blade gap - 1 setting is most closed,
6 setting is most open.
Click for more information or
video |
 |
|
------------------------------------------------------------------------- |
|
Two Part Razors
- Have a long screw release
for loading the blade as shown. The screw release dial at the base of the
handle is turned to loosen the screw:
Heavy
Duty Regular (regular HD) pictured is 3 1/4 inch total
razor length. Weight is 2.75 ounce with fixed/non-adjustable head.
Heavy Duty
Long Handle (long handle HD)
is 4" inch total razor length. Weight is 3.95 ounce with
fixed/non-adjustable head.
Heavy
Duty Slant Bar (slant HD) is 3 1/4 inch total razor length.
Weight is 2.75 ounce with fixed/non-adjustable head.
Progress
adjustable head razor is 3 1/2 inch
total razor length. Weighs 3 ounces and is an adjustable razor using the numbers 1
through 5 for blade gap - toward the 1 setting is most closed,
toward the
5 setting is most open. Turning knob at base of handle releases
the screw rod top for blade replacement and also adjusts the blade gap.
(Adjustable razors size comparison
video)
|
 |
|
------------------------------------------------------------------------- |
|
Three Part Razors -
Have a short screw release for
loading the blade as shown. The handle is turned to unscrew the top plates
for loading the blade:
Long handle classic is 4 1/4 inch total razor
length. Weight is 1.9 ounce with fixed/non-adjustable head
Antique
model is 3 1/4 inch total razor length. Weight is 1.7 ounce
with fixed/non-adjustable head
Regular toothed
model is 3 1/4 inch total razor length. Weight is 1.7 ounce
with fixed/non-adjustable head |
 |
|
_____________________________________________________________________________________ |
|
The following pictures
show the main head types you may see referred to on this web site. You
will see different blade release lever styles for the later razor
types.
The straight razor is sharpened by
the user, the double edge razor uses a double
edge blade, the fixed head razor uses a Trac II compatible two blade
cartridge, the swing arm razor uses an Atra compatible two blade
cartridge, the Sensor head razor uses a Sensor compatible two or three blade
cartridge, the Mach3 uses a three blade Mach3 compatible cartridge
and the Fusion head uses a Fusion five blade compatible cartridge.
|
|

Straight Razor |
<------
From then to now
------>

and many models in-between
... |

Fusion Manual / Fusion Power |
|
|
 |
|
|
-----------------------------------------
_____________________________________________________________________________________ |
 |
Use Merkur plastic
blade adaptors to turn any fixed (Trac II compatable blade head) razor into an
optional blade of
choice from the following selections.
$2.25 each, #merk-adap |
| Adaptor A, first picture: Atra™
compatible two blade swivel system #merk-adapta
|
Adaptor B, second picture:
Sensor™ two blade swivel system
#merk-adap
|
Adaptor C, third picture: Schick™
protector blade system #merk-adapc
|
|
|
 |
|
Please note: The Gillette® Fusion™, Mach3™, Sensor™ and Atra™ are registered trademarks of The Gillette Company.
Schick™
is a registered trademark of the Schick Company.
Em's Place is not affiliated with the Gillette or the Schick Companies. |
|
-----------------------------------------
c
Shop for Merkur brand double edged
razors
d |
|
|